Delivery day was an exciting milestone. The car arrived in a standard white transit van, packed with the chassis mounted on a trolley and surrounded by boxes. We managed to get the van around to the back of the house where the garage is located. I have a gravel driveway and was initially concerned about how we would navigate it, but it worked out fine in the end.
![]() |
| Yes I know there are only 2 wheels |
To help with the unload, I enlisted my teenage son. Between the two of us and the delivery driver, three people were plenty to handle everything safely.
Unloading the Chassis
The unload itself is easily the most nerve-racking part of the day:
The Skid Mechanism: The chassis sits on a high, specialized trolley. The unloading system works very much like an ambulance stretcher—as the trolley is pulled out of the back of the van, the legs deploy and it skids down to the ground. The driver clearly knew the drill, told us to stand clear, and let the chassis slide down off the rear.
Gravel Hazards: Once the trolley was on the ground, rolling it over our gravel driveway was tricky. The wheels caught and we came very close to tipping the chassis over, but we managed to catch it and keep it steady.
Onto the Axle Stands: Once inside, my son and I lifted the chassis while the delivery driver positioned the axle stands underneath.
A quick note on chassis placement: I initially set the car down a bit too close to the front garage doors. Later on, when it came time for the engine install, I had to get a couple of friends around just to help me shuffle the car further back. Think carefully about fore-and-aft clearance before you set the chassis down.
![]() |
| Amazon delivery on steroids |
As for axle stands, I have a fairly large garage with ample space to walk around the car, so standard static stands have worked fine. However, if you are building in a single or tighter garage space, mobile wheeled axle stands would definitely be worth the investment so you can shift the car side to side.
Workshop Mats on a Rough Concrete Floor
When we moved into our house a few years back, there was a makeshift shed built from pallets at the bottom of the garden, lined with heavy-duty rubber mats. I dismantled the shed at the time and stored the mats behind the garden shed.
After ordering the kit, I realized they were proper workshop/garage rubber floor tiles. Instead of spending money at Halfords, I dragged them out, jet-washed them, patched a few holes with gaffer tape, and laid them out around the build area.
They have been an absolute godsend. My garage has a rough, tumbled concrete floor rather than a smooth finish, which would have been brutal on the knees during long build sessions. The mats make working on the floor comfortable, and the engine crane rolled over them without issue.
Stashing the Bulky Items
A lot of large parts won't be needed until much later in the build. Rather than cluttering the workspace, I stored the large, vulnerable items in spare spaces around the house:
Seats
Front and rear wings
Bonnet
Getting these completely out of the workshop environment keeps them safe from accidental knocks and scratches while freeing up essential floor space.
![]() |
| Rememeber to re label if you are gonna decant |
The Decanting Mistake: Don't Separate Your Fixings
Once the car was on stands, unpacking the boxes felt a bit like Christmas. I had cleared several shelves in the garage and immediately started decanting the larger, heavier items out of boxes to get organized.
I still think getting parts up on shelves makes sense, but I made a significant mistake with the fasteners that I wish the manual had warned me against:
The Box Labels: The outer boxes are clearly labeled by subsystem (front suspension, rear suspension, lighting, etc.).
The Fixings Issue: I thought I was being organized by grouping all the fasteners into one dedicated "fixings area." Do not do this.
The Missing Labels: Roughly half of the fastener packs are clearly marked with their pack letter or corresponding box. However, a large number are simply supplied in unmarked, clear plastic bags.
The Result: Once you take those unmarked bags out of their original carton and mix them together, you lose track of which subsystem they belong to. You then have to waste time reverse-engineering what each bag of bolts is meant for against the manual.
Advice: Either leave the fastener packs inside their respective cartons until you actually start that specific assembly section, or clearly label each individual plastic bag with a marker pen before moving it to a shelf.
First Impressions
I am not a mechanic, nor would I consider myself a traditional petrolhead, so going through the boxes was fascinating. Seeing the mechanical assemblies up close gives you a real appreciation for how the car goes together. The standout component for me was the differential—I had never looked closely at one before, and it is a brilliant piece of engineering.
![]() |
| Its a thing of beauty |
With the garage arranged, the car securely on stands, and the parts laid out, I'm ready to get on with the actual build.




Comments
Post a Comment